V0

Previous
Next

Extremely compact electrically operated fiber blowing machine optimized for FTTX installation of blown fiber (EPFU) and micro/nano cables, from 0,8 to 6 mm into duct from 3 to 16 mm. A full digital control system with soft- start, electronic fiber security, memory functions, combined with high speed possibility makes the machine very easy and effective to use. Can be operated directly from its case.

Technical data

BLOWING MACHINE FOR CABLE
0,8 – 6 MM / DUCT 3-16 MM

  • Electrically operated. Battery connected. Optional power supply.
  • Allows installation in a larger duct with a smaller compressor.
  • The motor does not consume any airflow itself.
  • Electronic stopping/slipping protection within 250 ms.
  • Gentle operation, reduced cable pull with the aid of continuously variable pushing force.
  • Display for current speed, distance, cable force and pressure.
  • Max. speed: 250 m/min.
  • Stepless pushing force on cable up to: 60 N.
  • Adjustable clamping force.
  • Works with JetLogger.
  • Memory function that saves the last setting.
  • 110/240 V Power supply. No need to charge or change batteries
  • Table/Tripod bracket. For safe installation on working table.
  • Jetlogger. Electronic documentation system.
  • Metal drive wheel for < 2.5 mm cabel.

Softstart: Enables an even smoother start protecting the fiber.
Memory: The last inserted data like pushing force will stay in the memory even if the device will be switched off or the battery need to be exchanged.
Service info: Memory of total milage/distance since machine taken into operation.
Duct air temp: Display showing the air temperature injected into the duct.

MORE INFO

Jetting V0 Case

Robust Transport Case

V0 table bracket

Table bracket

Battery charger

V0 battery

18 V, 5Ah Battery

en_GB