Accessories

Y-Block for jetting second and third cable.

Y-Block for jetting second and third cable. Max 16 mm and max 12 mm. Supplied with 32 mm and 40 mm clamps as standard. Addition for further sizes is possible. A 25 mm pipe is connected between fibre blowing machine and Y block. Special UK version is available. Contact us for more info!

  • Max pressure:  30 Bar
  • Weight:  approx 3 kg
  • WxHxD:  190x130x100 mm

After Blower for V1 duct clamps

After Blower for V1 duct clamps. Robust handheld fibre blowing unit. Hand powered operation. Art no 18003.

FIBER BLOWING UNIT
for cables 1 – 16 mm / Duct 7 – 50 mm
  • Fits all V1 duct clamps and tensioner. Not included.
  • No small parts
  • Small and light weight
  • For pushing by hand
  • Perfect for small spaces and after mid blown installations

Air connection:  Std claw 1” European quick connector
Max pressure:  16 Bar
Cable diameter:  1 – 16 mm
Duct diameter:  7 – 50 mm
Weight:  approx. 0,5 kg

After Blower for V3 duct clamps

After Blower for V3 duct clamps. Robust handheld fibre blowing unit. Hand powered operation. Art.no: 18005

FIBRE BLOWING UNIT
for cables 4 – 40 mm Duct 10 – 63 mm
  • Fits all V3 duct clamps and tensioner. Not included.
  • No small parts
  • Small and light weight
  • For pushing by hand
  • Perfect for small spaces and after mid blown installations

Air connection:  Std claw 1” European quick connector
Max pressure:  16 Bar
Cable diameter:  4 – 40 mm
Duct diameter:  10 – 63 mm
Weight:  approx. 0,5 kg

Holds the duct and guides the air. Chose correct size depending on duct OD.

Holds the duct and guides the air. Chose correct size depending on duct OD.

Holds the duct and guides the air. Chose correct size depending on duct OD.

Guide for cable V0

Rubberized respectively toothed drive wheel for fiber.

  • Rubberized drive wheel for fiber up to 3 mm
  • Toothed drive gear for 3 – 4,5 mm
  • Toothed drive gear for 4,5 – 6 mm

Drive belts for different conditions.

  • Red drive belt standard
  • Orange drive belt for tougher conditions with great wear (HD, High Durability)

Cable seals in different sizes.

  • Cable seals standard.
  • Divisible cable seals (for split blowing).

Brass cable heads.

Threaded cable heads are available in the sizes:
2,5  3,0  3,5  4,0  4,5  5,0  5,5  6,0  6,5  7,0  7,5  8,0  8,5  9,0  9,5  10  16
Unthreaded (pinched in place) cable heads are available in the sizes:
1,8  2,0

Duct lubrication for ducts up to 16/12 mm.

Cleaning & lubrication – AVOID TROUBLE – do it right from the beginning!

You use the lubrication together with cleaning sponges by blowing them through the duct for lubrication AND cleaning. If you do this step carefully, you will avoid worries and gain a lot of time. By looking at the sponge, you can determine if more sponges need to be blown through. The lubricant also reduces static electricity!

Duct lubrication for ducts greater than 16/12 mm.

Cleaning & lubrication – AVOID TROUBLE – do it right from the beginning!

You use the lubrication together with cleaning sponges by blowing them through the duct for lubrication AND cleaning. If you do this step carefully, you will avoid worries and gain a lot of time. By looking at the plug, you can determine if more plugs need to be blown through. The lubricant also reduces static electricity!

Cleaning sponges for duct.

Cleaning & lubricantion – AVOID TROUBLE – do it right from the beginning!

You use the lubrication together with purging plugs by blowing them through cloth or pipe for lubrication AND cleaning. If you do this step carefully, you will avoid worries and gain a lot of time. By looking at the plug, you can determine if more plugs need to be blown through.

Available for all sizes of duct and pipes.

To be mounted on the cable reel for smoother fibre feed from the reel

To be mounted on the cable reel for smoother fibre feed from the reel, and for better ergonomics.

Max 1200 mm / 150 kg.

Transport size:

L120 x B70 x H10

Weight 10kg

Collapsible for smoother transport.

Tools for cutting duct 90 degrees

Tools for cutting duct 90 degrees in order to avoid stops in duct connectors

Micro Duct Cutter for ducts upp to 16mm. Art.no MDC-16.

Duct Cutter for ducts up to 42mm. Art.no PC-42. Spare blades for PC-42. Art.no PCB-42.

en_GB